HP XP P9000 for Business Continuity Manager Software Messages

Table 48 Details of error codes 23xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
specified to be the P-VOL is a
command device.
Not outputOutputA BC copy pair cannot be
resynchronized (QuickRestore)
237B
because all of the following
conditions exist:
• The specified P-VOL is an
internal volume.
• The specified S-VOL is an
external volume.
• The specified P-VOL has a
shared configuration with the
P-VOL of the CA.
Not outputOutputA BC copy pair cannot be made
because the volume specified to be
2381
the S-VOL is a system residence
volume.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2383
specified to be the S-VOL is a
command device.
Not outputOutputA BC copy pair cannot be made
because the volume specified to be
the P-VOL is being quick formatted.
2390
Not outputOutputA BC copy pair cannot be made
because the volume specified to be
the S-VOL is being quick formatted
2391
Not outputOutputA BC copy pair cannot be made
because the number of copy pairs
2394
in the specified C/T group
exceeded the maximum number of
copy pairs in a C/T group.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2395
specified to be the BC P-VOL is in
the Reverse Resync status with
another copy pair which shares the
P-VOL.
Not outputOutputA BC copy pair cannot be
resynchronized (including Reverse)
2398
because the copy pair is not in the
Split status.
Not outputOutputA BC copy pair status cannot be
changed because another copy
2399
pair that shares the P-VOL or S-VOL
is a FlashCopy pair or not in the
suspend status.
Not outputOutputA BC copy pair cannot be
resynchronized (including Reverse)
239A
because the specified P-VOL is the
P-VOL of a CA copy pair.
Details of error codes 179