HP XP P9000 for Business Continuity Manager Software Messages

Table 48 Details of error codes 23xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
specified to be the S-VOL is already
the P-VOL of a BC copy pair or the
one for FlashCopy.
Not outputOutputA BC copy pair status cannot be
changed because the same volume
2351
was specified for the P-VOL and
the S-VOL.
Not outputOutputA BC copy pair cannot be
resynchronized with Reverse or
2352
Quick specified because the P-VOL
and S-VOL are online.
Not outputOutputA BC copy pair cannot be
dissolved because the copy pair is
in the V-Split status.
2353
Not outputOutputA BC copy pair cannot be
resynchronized because the copy
pair is in the Pending status.
2354
Not outputOutputA BC copy pair status cannot be
changed. The reason might be one
of the following:
2358
• The status of another copy pair
that shares the P-VOL or S-VOL
is TRANS.
• There is a FlashCopy pair that
shares the P-VOL or S-VOL.
Not outputOutputA BC copy pair cannot be
resynchronized with Reverse or
235B
Quick specified because the P-VOL
is the P-VOL of a CA or CAA copy
pair that is not in the suspend
status.
Not outputOutputA BC copy pair cannot be
resynchronized with Reverse or
235C
Quick specified because the P-VOL
is the S-VOL of a CA or CAA copy
pair that is not in the suspend
status.
Not outputOutputA BC copy pair cannot be
resynchronized with Reverse or
235D
Quick specified because the S-VOL
is the P-VOL of a CA or CAA copy
pair that is not in the suspend
status.
Not outputOutputA BC copy pair status cannot be
changed because the specified
volume does not exist.
2370
Not outputOutputA BC copy pair cannot be made
because the volume specified to be
2371
the P-VOL is a system residence
volume.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2373
178 Storage system sense byte information