HP XP P9000 for Business Continuity Manager Software Messages

Table 48 Details of error codes 23xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
the copy pair is in the SIMPLEX
status.
Not outputOutputA BC copy pair cannot be made
because the emulation type of the
specified volume is not supported.
2334
Not outputOutputA BC copy pair cannot be made
because the RAID level or
2335
emulation type of the volume is not
supported.
Not outputOutputA BC copy pair status cannot be
changed because the combination
2336
of the drive emulation type of the
P-VOL and S-VOL is not
appropriate.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2337
specified to be the P-VOL is already
the S-VOL.
Not outputOutputA BC copy pair cannot be
resynchronized because the copy
pair is in the SIMPLEX status.
233A
Not outputOutputA BC copy pair cannot be
resynchronized with Reverse
233F
specified because a CA or CAA
copy pair is not in the suspend
status.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2343
specified to be the S-VOL is already
the S-VOL of a BC copy pair.
Not outputOutputA BC copy pair status cannot be
changed because the status of the
2344
copy pair does not allow the status
transition. The reason might be one
of the following:
• The volume specified to be the
S-VOL is already the P-VOL of a
BC copy pair.
• The volume specified to be the
S-VOL is in the SIMPLEX status.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2346
specified to be the S-VOL is already
the P-VOL of a CA or CAA copy
pair.
Not outputOutputA BC copy pair status cannot be
changed because the volume
2347
specified to be the S-VOL is already
the S-VOL of a CA or CAA copy
pair.
Not outputOutputA BC copy pair status cannot be
changed because the volume
234A
Details of error codes 177