HP XP P9000 for Business Continuity Manager Software Messages

Table 47 Details of error codes 20xx – 22xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputA BC copy pair cannot be made
because the specified P-VOL is an
S-VOL for Compatible FlashCopy.
22F6
Not outputOutputA BC copy pair cannot be made
because the specified S-VOL is
22F7
either a P-VOL or S-VOL for
Compatible FlashCopy.
Not outputOutputA BC copy pair cannot be
resynchronized (by either
22F9
ReverseResync or QuickRestore)
because the volume is of a common
volume configuration consisting of
a P-VOL of BC and a P-VOL of
Compatible FlashCopy.
Table 48 Details of error codes 23xx
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputThe command could not be
executed because a BC program
product has not been installed.
2301
Not outputOutputThe command could not be
executed because an attempt was
2309
made to make a copy pair that
exceeded the maximum number of
BC copy pairs.
Not outputOutputA BC copy pair status cannot be
changed because the status of the
2310
copy pair does not allow a status
transition. The reason might be one
of the following:
• The combination of the request
command and the status of the
specified copy pair do not allow
the status transition. For
information on combinations,
see the Business Copy for
Mainframe Systems User Guide
for the disk array.
• The copy pairs cannot be
suspended collectively because
a copy pair that is not in the
DUPLEX status is among the
specified copy pairs.
• The copy pairs cannot be
suspended collectively because
a copy pair for which transition
is not possible is among the
specified copy pairs.
• An ATTIME suspend time cannot
be set because a copy pair that
is not in the PENDING or
Details of error codes 175