HP XP P9000 for Business Continuity Manager Software Messages

Table 47 Details of error codes 20xx – 22xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputA BC copy pair cannot be
suspended if the following two
conditions exist:
2093
• The P-VOL of the specified BC
copy pair is the S-VOL of a
CAA.
• A CAA copy pair is not in the
Suspend status.
Not outputOutputWhen the P-VOL of the specified
BC copy pair is the S-VOL of a
2094
CAA, the BC copy pair cannot be
suspended for one of the following
reasons:
• The consistency time of the CAA
copy pair is not the latest time.
• The CAA copy pair changed to
Suspend status while it was in
Pending status, and the
consistency time was disabled.
Not outputOutputThe BC copy pair cannot be
resynchronized (QuickRestore)
2097
because the copy pair is made up
of a THPz volume and a non-THPz
volume.
Not outputOutputA copy pair could not be created
because the THPz volume specified
20A2
for the P-VOL of the BC pair is
being expanded.
Not outputOutputA copy pair could not be created
because the THPz volume specified
20A3
for the S-VOL of the BC pair is
being expanded.
Not outputOutputA copy pair could not be created
because the THPz volume specified
20B4
for the P-VOL of the BC copy pair
is not assigned to the pool.
Not outputOutputA copy pair could not be created
because the THPz volume specified
20B5
for the S-VOL of the BC copy pair
is not assigned to the pool.
Not outputOutputA copy pair could not be created
because the P-VOL of the specified
20BD
BC copy pair is an emulation type
(3390-V) that is not supported.
Not outputOutputA copy pair could not be created
because the S-VOL of the specified
20BE
BC copy pair is an emulation type
(3390-V) that is not supported.
Not outputOutputIf the emulation type of the P-VOL
of the specified BC copy pair is
20C9
3390-A, a copy pair could not be
Details of error codes 173