HP XP P9000 for Business Continuity Manager Software Messages

Table 45 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKZ41x) (continued)
Explanation and recommended actionsMessage textMessage ID
EXCTG information could not be acquired because
no EXCTG ID for copying in the forward direction is
EXCTG information could not be
acquired because no EXCTG ID is
YKZ420E MSG SC=48
RC=48
specified. The YKQEXCTG command with thespecified for copying in the forward
direction.
TO(SECONDARY) parameter is valid only when
copying in the forward direction and for copy group
containers with an EXCTG ID for the forward
direction. Check the copy direction of the copy group
container and the EXCTG ID direction (Forward or
Reverse), and then re-execute the command.
EXCTG information could not be acquired because
no EXCTG ID for copying in the reverse direction is
EXCTG information could not be
acquired because no EXCTG ID is
YKZ421E MSG SC=48
RC=48
specified. The YKQEXCTG command with thespecified for copying in the reverse
direction.
TO(PRIMARY) parameter is valid only when copying
in the reverse direction and for copy group containers
with an EXCTG ID for the reverse direction. Check
the copy direction of the copy group container and
the EXCTG ID direction (Forward or Reverse), and
then re-execute the command.
This log message indicates that a CLI command was
issued.
commandYKZ910I CON
command
The name of the issued CLI
command and its parameters
A maximum of 118 characters is
output. If the number of characters
exceeds 118, the excess part will
be truncated.
This log message gives the execution results of a CLI
command.
command RC=rcYKZ911I CON
command
The name of the CLI command
rc
Return code of the CLI command
See the CLI command descriptions
in the HP Business Continuity
Manager Reference Guide.
Multi-line messages output to SYSTSPRT
This section describes the multi-line messages that are output to SYSTSPRT.
In this section, character strings enclosed in angle brackets (< >) are variables.
YK8310I PRT
COPY GROUP : <cgid>
PREFIX : <prefix>
DAD-ID : <dad>
TYPE : <cgtype>
GROUP STATUS : <status>
SIMPLEX : <REPORT SUMMARY : simplexct>
MATCHING% : <match>
PENDING : <pendingct>
Multi-line messages output to SYSTSPRT 165