HP XP P9000 for Business Continuity Manager Software Messages

Table 44 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKZ91x) (continued)
Explanation and recommended actionsMessage textMessage ID
YYYY: Year
MM: Month
DD: Day
HH: Hour
MM: Minute
SS.NNNNNN: Second
The status of the Cnt Ac-J Z copy pair was invalid
while the suspend processing using the CAJ ATTIME
suspend function was being performed.
An unexpected CAJ pair status
existed during suspension of CAJ
ATTIME. (CT ID=ii, R-JNL=jj,
YKZ408E MSG SC=24
RC=24
Check the status of the Cnt Ac-J Z copy pair, and
remove the problem. After that, use the YKSUSPND
GENID=gg, ATTSTS=aa, SISTS=ss,
URSTS=uu, CODE=eeee,
TIME=ATTIME-suspend-time)
command to cancel the ATTIME suspend time, and
then acquire the backup again. See “Multi-line
messages output to SYSTSPRT” (page 165) for details.
ii (hexadecimal number)
consistency group ID for BC Z
(00-7F)
jj (hexadecimal number)
The journal group number
specified for the sub consistency
group ID for the Cnt Ac-J Z that
links with BC Z (00-FF)
gg (hexadecimal number)
Generation ID (00-FF)
aa (decimal number)
Status of ATTIME suspension (0-4)
0: No ATTIME suspend time has
been set.
1: The ATTIME suspend time has
been set, but suspension has not
been performed yet.
2: Suspension was performed
because the ATTIME suspend time
expired.
3: Suspension was performed
because the timeout period
expired, or because the Cnt Ac-J
Z copy pair was in the suspend
status at the ATTIME suspend time.
4: Suspension was performed
because the system detected a
no-update journal.
ss (decimal number)
Status of BC Z (0-3)
0: The suspend processing has
not started.
1: The suspend processing is in
progress.
2: The suspend processing ended
successfully.
List of messages 159