HP XP P9000 for Business Continuity Manager Software Messages

Table 44 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKZ91x) (continued)
Explanation and recommended actionsMessage textMessage ID
Generation ID (00-FF)
aa (decimal number)
Status of ATTIME suspension (0-4)
0: No ATTIME suspend time has
been set.
1: The ATTIME suspend time has
been set, but suspension has not
been performed yet.
2: Suspension was performed
because the ATTIME suspend time
expired.
3: Suspension was performed
because the timeout period
expired, or because the Cnt Ac-J
Z copy pair was in the suspend
status at the ATTIME suspend time.
4: Suspension was performed
because the system detected a
no-update journal.
ss (decimal number)
Status of ShadowImage (0-3)
0: The suspend processing has
not started.
1: The suspend processing is in
progress.
2: The suspend processing ended
successfully.
3: The suspend processing ended
abnormally.
uu (decimal number)
Status of Continuous Access
Journal(0 or 1)
0: All Continuous Access Journal
copy pairs were in the DUPLEX
status during the suspension.
1: During the suspension, there
was a Continuous Access Journal
copy pair whose status was not
DUPLEX.
eeee (hexadecimal number)
Error information on suspend
processing
0001: Suspension is not possible
because the ShadowImage copy
pair status is invalid.
0002: Suspension is not possible
because an error occurred due to
a problem in storage system.
ATTIME-suspend-time (GMT)
ATTIME suspend time:
YYYYMMDD-HH:MM:SS.NNNNNN
158 Messages