HP XP P9000 for Business Continuity Manager Software Messages

Table 36 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKZ10x – YKZ20x) (continued)
Explanation and recommended actionsMessage textMessage ID
The command cannot be executed because a REXX
write error occurred.
A REXX write error occurred. (return
code=nnn, name= name,
value=value, cmd=xxx,
YKZ204E TSO RC=40
1
• If the nnn value is 32:
Expand the job execution area, and then re-execute
the command.
pos=YKZ239E MSG SC=48
RC=48yyy)
• If the nnn value is 40:
Check that the REXX program is running in the
TSO/E environment, and then re-execute the
command.
• If the nnn value is not 32 or 40:
Correct the configuration file (XML) and the values
assigned to the parameters.
If the error still exists after the above action has been
taken, contact the service representative.
nnn (decimal number)
Return code from the OS's REXX
variable access routine
name (string)
REXX variable name
value (string)
REXX variable value
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code description
in the explanation of the YKZ201E
message.
yyy (string)
Maintenance information
1
If this message is output while the YKLOAD command
is being executed, the RC is 44.
The command cannot be executed because a
parameter error occurred.
A Parameter error occurred.
(detail=message-text, cmd=xxx,
pos=yyy)
YKZ205E TSO RC=0
message-text (string)
Message text
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code description
in the explanation of the YKZ201E
message.
yyy (string)
Maintenance information
122 Messages