HP XP P9000 External Storage for Open and Mainframe Systems User Guide (AV400-96599, January 2014)

Parameter SettingsParametersWindow Names
OptionalRS232C Error Information Outflow
Mode
Controller Option
ONWrite and verify mode
Standard ModeHost Connection Mode 1Host Connection Mode
HISUP Mode (do not specify any other parameter).Host Connection Mode 2
Identifying the 9500 V model using the serial number
You can identify the storage system model from the serial number displayed in the Vendor / Model
/ Serial Number column in the External Storage System tab.
The following table shows the relationship between the number in the Serial Number column and
the storage system model.
ModelDisplayed Serial Number
9570V, 9520VD600XXXX
9530VD60JXXXX
9580V, 9585VD60HXXXX
Note: In serial numbers, "X" is an arbitrary number or character.
Identifying the controller using the port WWN
You can identify the controller (controller 0 or controller 1) from the WWN of the port.
The following table describes the relationship between the port WWN and the controller.
WWN of PortControllerModel
XXXXXXXXXXXXXXX0Controller 09570V
XXXXXXXXXXXXXXX19530V
9520V
XXXXXXXXXXXXXXX2Controller 1
XXXXXXXXXXXXXXX3
XXXXXXXXXXXXXXX0Controller 09580V
XXXXXXXXXXXXXXX19585V
XXXXXXXXXXXXXXX2
XXXXXXXXXXXXXXX3
XXXXXXXXXXXXXXX4Controller 1
XXXXXXXXXXXXXXX5
XXXXXXXXXXXXXXX6
XXXXXXXXXXXXXXX7
Note: In WWNs, "X" is an arbitrary number or character. The ports in the same physical storage system have the
identical value.
HUS/AMS/WMS
The table below shows the system parameters that must be specified for ports on HUS, AMS, and
WMS storage systems when used with External Storage. You can specify or omit any other
parameters.
64 Supported external storage systems