HP XP P9000 Documentation Roadmap (AV400-96528, November 2012)

1 P9000 tasks and related manuals
This section provides an ordered task list with pointers to the P9000 user guide that provides the
instructions for the task.
Required setup tasks
The following tables included the required tasks that must be completed to set up a P9000 storage
system.
General task list
The following table provides high-level steps for the installation and configuration tasks. The tables
following it provide detailed task lists. See the related user guides for detailed task lists and
instructions.
User guideInstallation task
HP XP P9000 Site Preparation Guide1. Install the system
HP XP P9000 Owner Guide2. Turn on system power
NoneInstall software
(authorized service personnel)
HP XP P9000 Remote Web Console User Guide3. Set up Remote Web Console user accounts,
enable software licenses
See “4. Provisioning and configuration tasks” (page 5)4. Provision and configure the system
See “5. Storage virtualization tasks” (page 6)5. Set up virtualization
See “6. Data replication and disaster recovery tasks” (page 6)6. Set up replication
7. Set up monitoring, logs, and alerts
• HP XP P9000 Audit Log User Guide
• HP XP P9000 Remote Web Console User Guide
• HP XP P9000 Performance for Open and Mainframe Systems User
Guide
8. Tune system for performance
HP XP P9000 Remote Web Console Messages9. Troubleshoot and maintain system
1. Installation tasks
User guideStorage management task
HP XP P9000 Site Preparation GuideInstall the system
1. Create installation plan.
2. Prepare the facility
3. Prepare the location where the system will
be installed
4. Assist service personnel as needed.
5. Connect the system to a host.
4 P9000 tasks and related manuals