HP XP P9000 Continuous Access Synchronous for Mainframe Systems User Guide

DescriptionError code
(SSB2)
The storage system level cache is not valid in the RCU.C326
The pair cannot be created because the P-VOL is not available for remote copy.C327
The track formats of the P-VOL and the S-VOLdo not match.C328
The S-VOL is protected by the Volume Retention.C32A
The P-VOL is protected by the Volume Retention.C32B
The S-VOL is protected by the Volume Retention.C32C
The S-VOL is protected by the Volume Retention.C32D
A request for a Add Pair operation was rejected because the specified secondary system is an unsupported
product.
C32E
The number of P-VOL cylinders is not the same or smaller than the number of S-VOL cylinders.)C32F
The P-VOL volume capacity is not equal to the S-VOLC330
S-VOL cache is unavailable.C332
S-VOL DFW is disabled.C333
The S-VOL is the Cnt Ac-S Z P-VOLC335
The S-VOL includes PIN data.C336
The S-VOL is in reserve status.C337
Copy pair cannot be created because of the either of the following reasons.C338
• The S-VOL is in the intervention-required condition, protected, or unusable status.
• The S-VOL is the S-VOL or Reserved volume of Business Copy, Reserved volume of Auto LUN, or the
volume of Cnt Ac-J Z pair.
The S-VOL is not available.C339
A request for an Add Pair operation was rejected because the remote system is a not supported by Cnt Ac-S
Z.
C33A
The corresponding volume cannot be specified as an S-VOL because the volume is used as another pair’s
S-VOL.
C33B
A request for an Add Pair operation was rejected because the specified S-VOL was not mounted.C33C
The pair cannot be created because the S-VOL is not implemented or is blocked (DEV NOT READY status).C33E
The corresponding volume cannot be specified as an S-VOL because the volume is already specified as a
Cnt Ac-S Z pair volume.
C33F
The P-VOL is not accessible.C35C
There are fewer paths than the required minimum following a path failure or because an invalid path was
specified.
C370
The process that is performed after the copying process of Auto LUN in the S-VOL is in progress. Retry the
operation several minutes later.
C371
The process that is performed after the copying process of Auto LUN in the P-VOL is in progress. Retry the
operation several minutes later.
C372
A request for an Add Pair operation was rejected because the specified S-VOL is a Business Copy Reserved
volume.
C373
A request for an Add Pair operation was rejected because the specified P-VOL is a Business Copy Reserved
volume.
C374
98 Troubleshooting