HP XP P9000 Continuous Access Synchronous for Mainframe Systems User Guide

Pair status definitions
Both Remote Web Console and Business Continuity Manager pair status names appear in the Pair
Operation window Status column, except when the names are the same. When they are the same,
the Business Continuity Manager (BCM) status does not appear.
The following table shows both types of status names and their descriptions. In some cases, a
particular status has no exact parallel status in the other interface. This is noted.
When checking your pairs’ status, click File/Refresh to make sure the data is current. The P-VOL
access and S-VOL access columns in the following table indicate whether the volumes accept
read/write.
(For the RAID Manager status names, see “RAID Manager pair status names” (page 77).)
S-VOL accessP-VOL accessDescriptionBCM statusRWC status
Read/WriteRead/WriteThis volume is not currently assigned to a Cnt Ac-S
Z pair.
SIMPLEXSimplex
NoRead/WriteThe initial copy operation for this pair is in progress.
This pair is not yet synchronized.
PENDING (01)Pending
1
NoRead/WriteDUPLEX (02)Duplex
• The pair is synchronized
• Updates from the host to the P-VOL are
duplicated in the S-VOL.
Read Only if
Mode=20 is
Read/WriteSUSPOP (03),
SUSPOP (04),
Suspended
(See also
“Suspended
• The pair was suspend by a user. The pair is not
synchronized.
SWAPPING (04),
SUSPOP (05),
ON,
otherwise No.
• When you suspend the pair from the main
system, that system changes the status of the
P-VOL and S-VOL to Suspended.
types”
(page 77).)
Monitoring pair status 75