HP XP P9000 Continuous Access Synchronous for Mainframe Systems User Guide

Error descriptionError messageInternal codeMessage ID
An error occurred during the acquisition of the volume
mounting status.
API error
(GetEquipInfoEx).
5001-
An error occurred during the getting pair status
operation.
API error
(GetPairStatus256).
5002-
ErrorCode=6005 xxxx *
An error occurred during the getting pair status
operation.
API error (GetPairStatus).
ErrorCode=6005 xxxx *
5003-
An error occurred during the create pair operation.API error (SetCreatePair).5004-
ErrorCode=6005 xxxx *
An error occurred during the suspending pair operation.API error (SuspendPair).5005-
ErrorCode=6005 xxxx *
An error occurred during the changing pair options
operation.
API error
(ChangePairOption).
5006-
ErrorCode=6005 xxxx *
An error occurred during the release pair operation.API error (DeletePair).5007-
ErrorCode=6005 xxxx *
An error occurred at the copy start instruction.API error
(StartCreatePair).
5008-
ErrorCode=6005 xxxx *
An error occurred at retrying the getting pair status
operation.
API retry
(GetPairStatus256).
5020-
The number of pairs that is specified in the device list
exceeds the maximum value.
Too many pairs
(SetList/AddList).
4006-
The operation is interrupted by a user.Abort by operator.6666-
The operation is interrupted according to the modify
mode timeout.
Abort by unlock.6667-
* Error Code = 6005 xxxx corresponds to error codes of Remote Web Console. For details about Remote Web Console
error codes, see the HP XP P9000 Remote Web Console Messages.
152 Continuous Access Synchronous Z scripting