HP XP P9000 Continuous Access Synchronous for Mainframe Systems User Guide

DescriptionTypeVariable
1 = OK, 6 = Yes, 7 = No.
Stores the number of devices found by SelectHrcDevice macro.Numeric_SelectResult
0 = no devices found.
Reserved status variables
When a GetHrcStatus command is issued, the Remote Web Console computer obtains the
status of the specified pairs from the XPP9500. The results of this query are displayed in the reserved
status variables.
The following table describes the valid reserved status variables.
DescriptionTypeVariable
Stores the copy type: RDC = remote copy mode; RMC =
migration mode; “---” = other than RDC or RMC.
String_HrcStatus _CopyType
Stores the device attribute: “P-VOL” = P-VOL; “S-VOL” = S-VOL;
“---” = other than P-VOL or S-VOL.
String_HrcStatus _DeviceAttr
Stores the P-VOL device number.Numeric_HrcStatus _DeviceM
Stores the S-VOL device number.Numeric_HrcStatus _DeviceR
Stores the serial number of the controller for the remote pairs.String_HrcStatus _Sn
Stores the SSID of the controller for the remote pairs.Numeric_HrcStatus _Ssid
Stores the pair status: “Simplex” = simplex; “Duplex” = duplex;
“Pending” = initial copy in progress; “Suspended0” = copy abort
String_HrcStatus _PairStatus
in initial copy; “Suspended1” = copy abort other than initial
copy; “Undefined” = undefined.
Stores the P-VOL fence level: “Never” = no fence; “Status” =
fence due to an S-VOL status change failure; “Data” = fence due
to a data error; “Undefined” = undefined.
String_HrcStatus _Fence
Stores the synchronous level: “Synchronous0” = sync;
“Undefined” = undefined.
String_HrcStatus _Sync
Stores the pair status update time: “MM/DD/YYYY hh:mm:ss”
= MM: month, DD: day, YYYY: year, hh: hour, mm: minute, ss:
second.
String_HrcStatus _TimeOfUpdate
Stores the pair creation update time: “MM/DD/YYYY hh:mm:ss”
= MM: month, DD: day, YYYY: year, hh: hour, mm: minute, ss:
second.
String_HrcStatus _TimeOfEstablish
Stores the copy progress ratio (0 – 100).Numeric_HrcStatus _CopyRatio
Stores the internal status code.Numeric_HrcStatus _InternalStatus
Stores the consistency group number: 0x00-0x7F.Numeric_HrcStatus_CTG
Optional script parameters
Optional parameters can be added to a script as needed. The XP P9500 checks to ensure that
syntax requirements are met for optional parameters.
Optional script parameters 145