HP XP P9000 Continuous Access Synchronous for Mainframe Systems User Guide

000007
000001 08/03/05 10:06:22 0003 0000 Start HRC_CR19.SPT
000002 08/03/05 10:06:30 0015 0000 CreateHrcPair
$Dev = _ilDevA, ...
000003 08/03/05 10:06:32 0015 0100
0x0200: 0x0201: 0x0202: 0x0203:
000004 08/03/05 10:06:39 0016 0000
CreateHrcPair $Dev = _ilDevA, ...
000005 08/03/05 10:06:42 0016 0100 Start 0x0200:
0x0201: 0x0202: 0x0203:
000006 08/03/05 10:06:45 0021 0000 StartHrcPair
000007 08/03/05 10:06:45 0023 0000 End
------------------------------------------------------------------
(1) (2) (3) (4) (5) (6)
The following table describes the contents of the macro trace file.
DescriptionItem
All macros run by Cnt Ac-S Z are listed in chronological order and numbered.(1)
The date that the macro was run.(2)
The time that the macro was run.(3)
The location (script file line number) of the macro.(4)
The Cnt Ac-S Z scripting error code (0000 = no error). See the error trace file, except
when “0000” is displayed.
(5)
The macro that ran is displayed. If the macro was completed successfully, the status is
End.
(6)
The error trace file shown in the following example details the errors that occurred while running
scripts.
000002
000001 08/03/05 10:06:32 0014 5004 API error (SetCreatePair).
ErrorCode=6005 8704
000002 08/03/05 10:06:42 0016 5004 API error (SetCreatePair).
ErrorCode=6005 8704
------------------------------------------------------------------
(1) (2) (3) (4) (5) (6) (7)
The following table describes the contents of the error trace file.
DescriptionItem
All macro errors encountered by Cnt Ac-S Z are listed in chronological order and
numbered.
(1)
The date that the macro error occurred.(2)
The time that the macro error occurred.(3)
The location (script file line number) of the macro that caused the error.(4)
A Cnt Ac-S Z scripting error code (see “Error reporting” (page 147)).(5)
A Cnt Ac-S Z scripting error code message ID (see “Error reporting” (page 147)).(6)
Brief description of the error.(7)
Procedure 27 To export the script trace files:
1. Click File Operation on the Script Operation window to display the File Operation dialog
box.
Exporting script trace files 131