HP XP P9000 Continuous Access Synchronous for Mainframe Systems User Guide

XP24000/XP20000 Disk
Array,
XP12000 Disk Array/XP10000
Disk Array
XP P9500IBM 3990 6EFeature
Default = 1. If the minimum
number of MCU-RCU active
Default = 1. If the minimum
number of MCU-RCU active
Not supportedMinimum paths
paths falls below this value, allpaths falls below this value, all
pairs will be suspended basedpairs will be suspended based
on the Fence Level option in
effect.
on the Fence Level option in
effect.
CU Options
Default = YES - PPRC
supported, optional capability
Default = YES - PPRC
supported, optional capability
Host must support PPRCPPRC support by host
to allow host support for nonto allow host support for non
PPRC capable operating
systems.
PPRC capable operating
systems.
To any host or only to RCU hostTo any host or only to RCU hostNot supported per IBM doc
Planning for IBM Remote Copy
(SG24-2594-009 p.184)
RCU-to-MCU SIM reporting
Default = Not report; Designed
for non-MVS operating systems
Default = Not report; Designed
for non-MVS operating systems
Not supported per IBM doc
Planning for IBM Remote Copy
(SG24-2594-009 p.184)
RCU to MCU service SIM
reporting
that do not support SIM
reporting.
that do not support SIM
reporting.
Pair Options
Optional to S-VOL, default =
P-VOL
Optional to S-VOL, default =
P-VOL
Not supportedCache fast write data
256 per CU256 per CU256 per storage systemMax. volumes
Per IBM docPer IBM docPer IBM docSIM/error messages
ESCON or FICONFICONParallel or ESCONPrimary storage system
interface
ESCON or FICONFICONParallel or ESCONSecondary storage system
interface
Contact your HP representative.Contact your HP representative.YesChannel extender support
IEA494I and IEA491E console messages 125