HP XP P9000 Continuous Access Journal User Guide

• Forward Path Watch Time—establishes whether to forward the Path Watch Time value of the
master journal to the restore journal.
• Transfer Speed—which specifies the speed for data transfer
• Delta Resync Failure—which specifies the processing that takes place in the event of a failure.
Prerequisite information
Please be aware of the following when changing mirror options:
• Mirror options can be changed on both primary and secondary systems.
• To change mirror options, the status of the mirror must be one of the following:
Initial◦
◦ Active
◦ Stopped
◦ Hold
◦ Holding
◦ Hold(Failure)
• The Transfer Speed option can be changed if the mirror’s status is Active, Hold, or Holding.
• When changing options for multiple mirrors, you can leave some options unchanged by
entering or selecting no value. If you specify a value, it is applied to the selected mirrors.
Procedure 20 To change options for a mirror
1. In the Remote Web Console main window, select Actions > Remote Copy > Continuous Access
Journal > Journal Operation. The Journal Operation window displays.
2. Click to change the mode from View to Modify.
3. In the table pane, right-click the desired journal and then select Mirror > Change Mirror Option.
4. For Unit of Path Watch Time, specify the unit of time for Path Watch Time, minute, hour, or
day.
Journal and mirror maintenance 83