HP XP P9000 Configuration Guide (AV400-96525, November 2012)

Use QERR Bit [yes]
Device CLEARS its Queue on Error [no]
READ/WRITE time out value [60]
START unit time out value [60]
REASSIGN time out value [120]
APPLY change to DATABASE only no
7. Repeat these steps for each OPEN-x device on the disk array.
Assigning the new devices to volume groups
Assign the new devices to volume groups using the AIX system's Logical Volume Manager (accessed
from within SMIT). This operation is not required when the volumes are used as raw devices.
Assigning a device to a volume group
1. Start SMIT. (Optional) For an ASCII session, use the smit –C command.
2. Select System Storage Management (Physical & Logical Storage).
Example
System Management
Move cursor to desired item and press Enter.
Software Installation and Maintenance
Software License Management
Devices
System Storage Management (Physical & Logical Storage)
Security & Users
Communications Applications and Services
Print Spooling
Problem Determination
Performance & Resource Scheduling
System Environments
Processes & Subsystems
Applications
Using SMIT (information only)
3. Select Logical Volume Manager.
Example
System Storage Management (Physical & Logical Storage)
Move cursor to desired item and press Enter.
Logical Volume Manager
File Systems
Files & Directories
Removable Disk Management *1
System Backup Manager
4. Select Volume Groups.
Example
Logical Volume Manager
Move cursor to desired item and press Enter.
Volume Groups
Logical Volumes
Physical Volumes
Paging Space
5. Select Add a Volume Group.
Example
Volume Groups
Move cursor to desired item and press Enter.
74 IBM AIX