HP XP P9000 Configuration Guide (AV400-96525, November 2012)

4. Verify that this directory exists:
Example
$ show default
$1$dga100:[user]
If the user directory does not exist, OpenVMS returns an error.
5. Create a test user file:
Example
$ create test.txt
this is a line of text for the test file test.txt
[Control-Z]
The create command creates a file with data entered from the terminal. Control-z terminates
the data input.
6. Verify whether the file is created:
Example
$ directory
Directory $1$DGA100:[USER]
TEST.TXT;1
Total of 1 file.
7. Verify the content of the data file:
Example
$ type test.txt
this is a line of text for the test file test.txt
8. Delete the data file:
Example
$ delete test.txt;
$ directory
%DIRECT-W-NOFILES, no files found
$ type test.txt
%TYPE-W-SEARCHFAIL,error searching for
$1$DGA100:[USER]TEST.TXT; -RMS-E-FNF,
file not found
The delete command removes the test.txt file. The directory command verifies that
the test.txt file is removed, and the type command verifies that the test.txt file is no
longer in the system.
9. Delete the test user directory by entering this command:
Example
$ delete $1$dga100:[000000]user.dir;
$ show default $1$DGA100:[USER]
%DCL-I-INVDEF, $1$DGA100:[USER] does not exist
The delete command removes the USER directory from the disk volume. The show default
command verifies that the user directory is removed.
10. Restore the default login directory by entering this command:
set default sys$login:
Configuring disk array devices 45