HP XP P9000 Business Copy User Guide (AV400-96573, July 2013)

Table 10 RAID Manager Error Codes (continued)
DescriptionSSB2 code
The pair operation was rejected because of one of the following reasons:2337
• The volume you specified as the P-VOL is an intermediate volume.
• The number of volumes you specified for P-VOLs combined as a LUSE volume differs from that for
S-VOLs.
• You specified only P-VOLs for the LUSE volume.
• You specified only S-VOLs for the LUSE volume.
The pairresync was rejected because the volume you specified as the P-VOL was not a BC P-VOL.233A
The pair operation was rejected because the volume you specified as the S-VOL was a root volume.233B
The pair operation was rejected because the volume you specified as the S-VOL was a node volume,
and the volume you specified as the P-VOL was not the P-VOL for the S-VOL you specified.
233C
The pairsplit was rejected because the P-VOL and S-VOLs you specified were a L2 pair, and the L1
pair was not split (PSUS status).
233D
The pair operation was rejected because the volume you specified as the P-VOL was used as the Cnt
Ac-S P-VOL.
233E
The pair operation was rejected because the volume you specified as the S-VOL was the Cnt Ac-S
P-VOL, and the pair was not split (PSUS status) or suspended (PSUE status).
233F
The pair operation was rejected because the volume you specified as the S-VOL was the destination
of the Auto LUN.
2342
The create pair operation was rejected because the volume you specified as the S-VOL had already
been an S-VOL.
2343
The pair operation was rejected because the volume you specified as the S-VOL for BC pair operations
was not an S-VOL.
2344
The volume you specified as an S-VOL was a Cnt Ac-S P-VOL. The pair operation was rejected because
the status of the Cnt Ac-S pair was invalid.
2346
The volume you specified as an S-VOL was a Cnt Ac-S S-VOL. The pair operation was rejected because
the status of the Cnt Ac-S pair was invalid.
2347
The pair creation for the cascade configuration was rejected because the volume you specified as
the S-VOL was an intermediate volume.
234A
The pair operation was rejected because the volume you specified as the S-VOL was the volume of
the Auto LUN.
234B
The pair operation was rejected because the P-VOL and the S-VOL you specified for BC pair operations
was not a pair.
2350
The pair operation was rejected because the volume you specified as the P-VOL and the volume you
specified as the S-VOL was the same one.
2351
The Quick Restore operation or the Reverse Copy operation was rejected because the P-VOL and
S-VOLs you specified was online to the host.
2352
The deletion operation was rejected because the P-VOL and S-VOLs you specified was being Quick
Split.
2353
The pairresync operation was rejected because the P-VOL and S-VOLs was being split by using Steady
Split.
2354
The pair creation was rejected because the volume you specified as the S-VOL was the P-VOL of the
splitting pair, or the P-VOL of the pair where the Reverse Copy operation or Quick Restore operation
is being performed.
2357
The pairresync operation was rejected because the volume you specified as the S-VOL was the P-VOL
of the splitting pair.
2358
66 Troubleshooting