HP XP P9000 Business Copy User Guide (AV400-96573, July 2013)
Table Of Contents
- HP XP P9000 Business Copy User Guide
- Contents
- 1 Business Copy overview
- 2 Requirements and planning
- 3 Sharing Business Copy volumes
- Cache Residency
- Fast Snap and Snapshot
- Data Retention
- Thin Provisioning and Smart Tiers
- External Storage Access Manager
- LUN Manager
- Open Volume Management
- Resource Partition
- Continuous Access Synchronous
- Continuous Access Journal
- External Storage
- Auto LUN
- 4 Performing configuration operations
- 5 Performing pair operations
- 6 Monitoring and maintaining the system
- 7 Troubleshooting
- 8 Support and other resources
- A Interface support for BC operations and options
- B Business Copy GUI reference
- Replications window
- Local Replications window
- View Pair Properties window
- View Pair Synchronous Rate window
- View Histories window
- Consistency Group Properties window
- Create Pairs wizard
- Split Pairs wizard
- Resync Pairs wizard
- Suspend Pairs window
- Delete Pairs window
- Edit Mirror Units dialog box
- Change Options dialog box
- Add Reserve Volumes Wizard
- Remove Reserve Volumes window
- Edit Local Replica Option wizard
- C Configuration operations (secondary window)
- D Pair operations (secondary window)
- E Monitoring and maintaining the system (secondary window)
- F Business Copy GUI reference (secondary window)
- Glossary
- Index
Continuous Access Synchronous
You can share Cnt Ac-S volumes with BC volumes.
• You can share BC P-VOLs and S-VOLs with Cnt Ac-S P-VOLs and S-VOLs. However, you cannot
share a BC S-VOL with a Cnt Ac-S S-VOL.
• When you share a BC P-VOL with a Cnt Ac-S S-VOL, the write operation on the Cnt Ac-S
P-VOL takes more time. This is especially true when the BC pair is in the PSUS(SP) status
because of the copying time needed for the BC pair.
• You can use both L1 and L2 pairs with Cnt Ac-S volumes. Both node and leaf S-VOLs are
considered S-VOLs by Cnt Ac-S.
• You can perform the Quick Restore operation on a BC pair when the Cnt Ac-S pair is
suspended.
• The BC P-VOL can be shared with Cnt Ac-S volumes in a 3 data center configuration. For
more information, see “Sharing volumes in a 3-Cnt Ac-S/Cnt Ac-J DC cascade configuration”
(page 34).
• You can use the consistency group pair-split operation on BC pairs whose volumes are shared
with Cnt Ac-S S-VOLs. For more information, see “The consistency group pair-split for shared
volumes” (page 19).
For more information about sharing BC and Cnt Ac-S volumes, see the section on sharing volumes
with BC in the HP XP P9000 Continuous Access Synchronous User Guide.
Continuous Access Journal
You can share Cnt Ac-J volumes with BC volumes.
• You can share BC P-VOLs with Cnt Ac-J P-VOLs and S-VOLs.
• You cannot share BC S-VOLs with Cnt Ac-J S-VOLs.
• You cannot share BC pair volumes with Cnt Ac-J journal volumes.
• You can use both L1 and L2 pairs with Cnt Ac-J volumes. Both node and leaf S-VOLs are
considered S-VOLs by Cnt Ac-J.
• You can share BC volumes with Cnt Ac-J volumes in a 3 Cnt Ac-J data center configuration.
For more information, see “Sharing volumes in 3-Cnt Ac-J data center configurations” (page 28).
• You can share the BC P-VOL with Cnt Ac-J and Cnt Ac-S volumes in a 3 Cnt Ac-J/Cnt Ac-S
data center configuration. For more information, see “Sharing volumes in a 3-Cnt Ac-S/Cnt
Ac-J DC cascade configuration” (page 34).
• You can use the consistency group pair-split operation on BC pairs whose volumes are shared
with Cnt Ac-J S-VOLs. For more information, see “The consistency group pair-split for shared
volumes” (page 19).
For more information about sharing BC and Cnt Ac-J volumes, see the related appendix in the HP
XP P9000 Continuous Access Journal User Guide.
Sharing volumes in 3-Cnt Ac-J data center configurations
You can share BC pair volumes with Cnt Ac-J volumes in the following 3-Cnt Ac-J data center (3DC)
configurations:
• Multi-target
• Delta-resync
• Cascade
These sections describe the configurations and supported BC operations.
28 Sharing Business Copy volumes