HP XP P9000 Business Copy User Guide (AV400-96573, July 2013)
Table Of Contents
- HP XP P9000 Business Copy User Guide
- Contents
- 1 Business Copy overview
- 2 Requirements and planning
- 3 Sharing Business Copy volumes
- Cache Residency
- Fast Snap and Snapshot
- Data Retention
- Thin Provisioning and Smart Tiers
- External Storage Access Manager
- LUN Manager
- Open Volume Management
- Resource Partition
- Continuous Access Synchronous
- Continuous Access Journal
- External Storage
- Auto LUN
- 4 Performing configuration operations
- 5 Performing pair operations
- 6 Monitoring and maintaining the system
- 7 Troubleshooting
- 8 Support and other resources
- A Interface support for BC operations and options
- B Business Copy GUI reference
- Replications window
- Local Replications window
- View Pair Properties window
- View Pair Synchronous Rate window
- View Histories window
- Consistency Group Properties window
- Create Pairs wizard
- Split Pairs wizard
- Resync Pairs wizard
- Suspend Pairs window
- Delete Pairs window
- Edit Mirror Units dialog box
- Change Options dialog box
- Add Reserve Volumes Wizard
- Remove Reserve Volumes window
- Edit Local Replica Option wizard
- C Configuration operations (secondary window)
- D Pair operations (secondary window)
- E Monitoring and maintaining the system (secondary window)
- F Business Copy GUI reference (secondary window)
- Glossary
- Index
Supported operations and statuses are shown in the following tables.
Pair operationPair Status
Delete pairsSuspend pairsResync pairs
(reverse)
Resync pairs
(forward)
Split pairsCreate pairs
NONONONOYESYESSMPL
NONONONONONOSMPL(PD)
YESYESNONOYESYESCOPY(PD)/COPY
YESYESNONOYESYESPAIR
YESYESNONONONOCOPY(SP)/COPY
NOYESNOYESNONOPSUS(SP)/PSUS
YESYESYESYESNONOPSUS
YESYESNONONONOCOPY(RS)/COPY
YESYESNONONONOCOPY(RS-R)/RCPY
YESNONOYESNONOPSUE
Related information
• “Status of unaffected S-VOLs, operations permitted ” (page 57)
• “Status for L1, L2 pairs and operations permitted” (page 55)
Reviewing pair, volume details
You can review the data related to L1 and L2 pairs and their volumes. This includes volume capacity,
pair status, P-VOL and S-VOL identifiers, and several other details.
NOTE: LDEVs for P-VOLs and S-VOLs listed in RWC may end in the following special symbols:
• A pound or gate symbol (#), which indicates an external volume (for example, 00:00:01#).
• The letter X, which indicates that a virtual volume used by Thin Provisioning (for example,
00:00:01X).
1. In RWC, click Actions > Local Replications > BC/SS > Pair Operation.
2. In the tree, select the port or host group where the pairs or volumes are located. Related
volumes are shown in the volume list.
126 Monitoring and maintaining the system (secondary window)