HP XP P9000 Business Copy for Mainframe Systems User Guide (AV400-96572, July 2013)

Pair statusOper.
Suspd./SUSPERResync-R/REVRSYResync/PENDINGSplit/SUSPOPV-Split/SUSPVSSP-Pend
/TRANS
DUPLEXPend.SIMPLEX
NONO
2
NOYESNONONO
2
NONOResync Pair
(reverse)
YESYESYESYESNOYESYESYESNODelete Pair
1. With BCM, the command terminates normally but pair status does not change because resync processing is not performed.
2. If you use the PPRC TSO command, the command terminates normally but pair status does not change because resync
processing is not performed. However, if you specify YES in the MSGREQ parameter, the command terminates abnormally
with CC=8.
If you use the ICKDSF PPRCOPY command, the command terminates abnormally with CC = 12.
3. If the pair status changes from Suspend/SUSPER to Resync/PENDING, the PPRC TSO command ends abnormally with CC=8.
Related information
• “Status of unaffected S-VOLs, operations permitted ” (page 52)
Status of unaffected S-VOLs, operations permitted
The pair operations you can perform depend on the pair’s status, but also on the status of unaffected
S-VOLs. The following table shows which operations can be performed, given the status of S-VOLs
related to the P-VOL in other pairs.
Pair operationStatus of
unaffected
S-VOLs
Delete pairsSuspend pairsResync pairs
(reverse)
Resync pairs
(forward)
Split pairsCreate pairs
NONONONONONODeleting/TRANS
YESYESNOYESYESYESPENDING
YESYESNOYESYESYESDUPLEX
YESYESNOYESYESYESSP-Pend/TRANS
NOYESNOYESYESYESV-Split/SUSPVS
YESYESYESYESYESYESSplit/SUSPOP
YESYESNOYESYESYESResync/PENDING
YESYESNONONONOResync-R/REVRSY
YESYESYESYESYESYESSuspend/SUSPER
Monitoring pair, volume details
You can review the data related to pairs and their volumes. This includes volume capacity, pair
status, P-VOL and S-VOL, identifiers, and several other details.
• Select the pair in Local Replications then click More Actions > View Pair Properties
Related information
• “View Pair Properties window” (page 93)
Monitoring synchronous rates
You can check on the percentage of synchronized data between the P-VOL and S-VOL.
• Select the pair in Local Replications then click More Actions > View Pair Synchronous Rate.
52 Monitoring and maintaining the system