HP XP P9000 Business Continuity Manager User Guide (T5253-96086, November 2013)

Figure 135 Definition example of a copy group that is not a copy group container
Before you define a copy group, make sure that you to decide on values for the following
beforehand:
• DAD ID for the primary site and the secondary site
The examples in this section use the following values:
◦ For the primary site: DADP
◦ For the secondary site: DADS
• Prefix for the configuration file name
For details, see “Setting a prefix for configuration files” (page 120).
Defining the copy group ID and copy group attributes (Continuous Access Journal Z)
To define a Continuous Access Journal Z copy group:
1. Display the Discover/Define Configuration panel and choose 4 Copy Group Definitions.
The Copy Group Selection List panel displays.
2. Press the F5=Add key to add a Continuous Access Journal Z copy group.
The Add Copy Group panel displays.
3. Specify the Copy Group ID, Device Address Domain (for both Primary and Secondary), and
Copy Group Type (CAJ).
If this is a copy group container definition, specify / for Use Container. If this is not a copy
group container, leave Use Container blank.
. -----------------------------------------------------------------.
| Add Copy Group |
| Command ===> |
| |
| Copy Group ID . . . GRP1 |
| Device Address Domain, |
| Primary . . . . . DADP |
| Secondary . . . . DADS |
| Copy Group Type . . CAJ Use Container |
Defining a copy group 647