HP XP P9000 Business Continuity Manager User Guide (T5253-96086, November 2013)

Table 113 Using a 4x4x4 Delta Resync configuration (continued)
See:DescriptionTargetMaintenance or
failure
No.
Page 580Execute Delta Resync, and then change the configuration to a
4x4x4 configuration that originates from the local site (Local ->
Primary and Local -> Remote).
Primary site host
failure
13
Page 586Suspend Cnt Ac-S Z copy pairs by using the Cnt Ac-S Z
Consistency Preservation Function, and then resynchronize the
Cnt Ac-S Z copy pair.
Failure on a
path from the
primary-site
14
storage system
to the local-site
storage system
TIP: The term "storage system failure, with information lost from memory," indicates a failure that
causes the loss of information in memory. In such a failure, the copy pair information and the data
are completely lost, so the hardware information must be reconfigured.
This section provides maintenance and troubleshooting procedures for a 4x4x4 Delta Resync
cofiguration.
The figures in the procedures in this section use the following legend.
The bullet lists under the figures in the procedures show the commands that must be executed.
Performing primary site storage system maintenance
The following are the procedures for primary site storage system maintenance.
Failover
1. Stop operation at the primary site.
Using a 4x4x4 Delta Resync configuration 539