HP XP P9000 Business Continuity Manager User Guide (T5253-96086, November 2013)

Setting up an environment at the local site
1. From the local host, define a path set that consists of an inter-control unit logical path (Local
-> Primary) and an inter-disk controller logical path (Local -> Remote) (or set these paths by
using Storage Navigator).
2. From the local host, define a route list (Local -> Primary and Local -> Remote routes).
3. From the local host, establish an inter-control unit logical path (Local -> Primary) and an
inter-disk controller logical path (Local -> Remote).
276 Configuration definitions