HP XP P9000 Business Continuity Manager User Guide (T5253-96086, November 2013)

Table 56 Required route list (3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z) configuration) (continued)
Required route listRemote site 2
state
Remote site 1
state
Primary site
state
Host on which Business
Continuity Manager is
started
Remote 2 → PrimaryUsableUnusableUsable
Remote 2 → Remote 1UsableUsableUnusable
Not requiredUsableUnusableUnusable
Legend:
Usable: The target site can be used.
Unusable: The target site cannot be used because of an error.
The following table shows how to prepare the configuration files at each site.
Table 57 How to prepare the configuration files at each site (3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z)
configuration)
How to prepareContentsFile type
At the remote site 2At the remote site 1At the primary site
Transfer from the
primary site
Transfer from the
primary site
Perform a Local
Scan
The primary site configurationDisk configuration
definition file
Transfer from remote site
1
Perform a Local ScanTransfer from remote
site 1
The remote site 1 configuration
Perform a Local ScanTransfer from remote site
2
Transfer from remote
site 2
The remote site 2 configuration
Not requiredNot requiredDefine a path setAn inter-disk controller logical
path between the following sites:
Path set definition
file
• Primary site → Remote site 1
• Primary site → Remote site 2
Not requiredDefine a path setNot requiredAn inter-disk controller logical
path between the following sites:
• Remote site 1 → Primary site
• Remote site 1 → Remote site
2
Define a path setNot requiredNot requiredAn inter-disk controller logical
path between the following sites:
• Remote site 2 → Primary site
• Remote site 2 → Remote site
1
Not requiredNot requiredDefine a route listA route/command device
between the following sites:
Route list definition
file and command
device definition file
• Primary site → Remote site 1
• Primary site → Remote site 2
Not requiredDefine a route listNot requiredA route/command device
between the following sites:
• Remote site 1 → Primary site
• Remote site 1 → Remote site
2
190 Configuration definitions