HP XP P9000 Business Continuity Manager User Guide (T5253-96086, November 2013)

5 Configuration definitions
This chapter describes the configuration definition procedures for managing replication packages
for multiple data center configurations. First, prepare the hardware and software at each site.
Next, after establishing logical paths and defining the Remote DKC Control Function, register
command devices, and then create a copy group. For details on how to operate the ISPF panels,
see “Using the ISPF panels” (page 588).
Defining a 2DC configuration
This section explains how to define a 2DC configuration with one storage system installed at each
site. For background information about these operations (such as logical path establishment, route
list definition, command device registration, and remote scans), see “Preparing to use Business
Continuity Manager” (page 117). For details on how to perform these operations, see “Using the
ISPF panels” (page 588).
A 2DC configuration example
Figure 80 (page 142) shows an example of a required 2DC configuration. This figure assumes the
use of the Remote DKC Control Function.
Figure 80 Example of a 2DC configuration
Preparing the hardware (2DC configuration)
Table 34 (page 143) lists the prerequisite hardware for using Business Continuity Manager in a
2DC configuration and Table 35 (page 143) lists the storage system setting items.
142 Configuration definitions