HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
Each bit position (on/off) of the function switch information assigned by 64 bits. The
beginning of the string is bit 0 and the ending of it is bit 63. “0” indicates the bit is off,
and “1” indicates the bit is on.
Switch
In the example above, bit 3 and bit 5 are on and the other bits are off.
[Cnt Ac-S Z] Resume Pair
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Resume Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),Fence Level,Copy Pace,
Priority,TS,Result}
=[{0x00:0x00:0x00,0xFE,Never,15,256,Enable,Normal end},
{0x00:0x00:0x01,0xFF,Never,15,256,Enable,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the main volume in the restored pair.M-VOL(LDKC:CU:LDEV)
The LDEV number of the remote volume in the restored pair.R-VOL(LDEV)
The fence level set (the condition that MCU rejects the write operation to the primary
volume).
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at a time by restoring).Copy Pace
The priority of the restoring operation set (scheduling order).Priority
Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair
is restored.
TS
Enable: transferred, Disable: not transferred
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of restored pairs.Num. of Pairs
[Cnt Ac-S Z] Script Operation
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Script Operation,Run,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+FileName=script.spt
Continuous Access Synchronous Z descriptions 199