HP StorageWorks P9000 Virtualization Adapter Administrator Guide (5697-0680, October 2010)

• [P9000 Virtualization Adapter] [Time]: [ ] : malloc : “system error message”
Cause–Could not retain the memory for executing the P9000 Virtualization Adapter.
Action to be taken–Increase the capacity of virtual memory of the whole system or terminate unne-
cessary programs or Daemon processes running simultaneously.
• [P9000 Virtualization Adapter] [Time]: [ ] : “Command line” failed with RC=XXX.
Cause–The RAID Manager command Command line has failed with RC=XXX.
Action to be taken–Remove the cause of the error after confirming the RAID Manager error code
and command error log messages output in this log file, as shown in the example below:
---------------------------------------
COMMAND ERROR : EUserId for HORC[24] : root (0) Thu Jul 17 18:38:55
2008
CMDLINE : pairdisplay -IH -d 64015 9 0 -CLI -l -fwe
18:38:55-41110-14817- ERROR:cm_sndrcv[rc < 0 from HORCM]
18:38:55-4c5e8-14817- Could not find a group on configuration file for
this LDEV.(Port# ?,Seq# 64015,LDEV# 9,mun# 0)
18:38:55-51feb-14817- [pairdisplay][exit(239)]
[EX_ENOGRP] No such group
[Cause ]:The group name which was designated or the device name doesn't
exist in the configuration file,or the network address for remote com-
munication doesn't exist.
[Action]:Please confirm if the group name exists in the configuration
file of the local and remote host.
---------------------------------------
Configuration and status errors
• [P9000 Virtualization Adapter] [Time]: [disarray_exe] : Unknown PWWN.
Cause–Could not find the Port WWN in the output of pairdisplay −fw command via discov-
erArrays.
Action to be taken–Confirm that RAID Manager is a version supported by the P9000 Virtualization
Adapter.
• [P9000 Virtualization Adapter] [Time]: [dislun_exe] : invalid arrayId (-…).
Cause–A parameter in XML (discoverLuns) was entered from SRM to the P9000 Virtualization
Adapter, but it could not be found correct Array ID.
Action to be taken–Confirm that SRM has passed an Array ID parameter in XML (discoverLuns)
from own SRM log message
• [P9000 Virtualization Adapter] [Time]: [dislun_exe] : Unknown PWWN.
Cause–Could not find the Port WWN in the output of pairdisplay −fw command via discov-
erLuns.
Action to be taken–Confirm that RAID Manager is a version supported by the P9000 Virtualization
Adapter.
• [P9000 Virtualization Adapter] [Time]: [failover_chk] : “ Command line” ? P/S = …, Status = …,
Fence = ….
Cause–The pair status of a target volume specified with failover is inappropriate status (SMPL, P-
VOL, or COPY).
P9000 Virtualization Adapter Administrator Guide 45