HP P9000 Provisioning for Open Systems User Guide (AV400-96396, October 2011)

DescriptionItem
Pool capacity.Capacity
How the pool is being used.Pool Type
• For Thin Provisioning or Smart Tiers: THP appears.
• For Snapshot: Snapshot appears.
Drive type and RPM of the pool. Mixed indicates the drive types or RPMs in the
pool are mixed.
Drive Type/RPM
User-defined pool threshold values, in %, specified for the selected pool.User-Defined threshold (%)
• Warning: The value defined for the Warning Threshold.
• Depletion: The value defined for the Depletion Threshold.
For a Snapshot pool, a hyphen (-) appears for Depletion.
Subscription limit, in %, specified for this pool.Subscription Limit (%)
The subscription limit is the ratio (%) of the V-VOL capacity that can be configured
to the total capacity of the pool volume. You cannot configure the V-VOL capacity
to exceed the subscription limit. For example, if the pool volume capacity is 100
GB and the subscription limit is 150%, you can configure up to 150 GB of the
capacity of V-VOL.
For Snapshot pool, a hyphen (-) appears.
The number of the pool-VOLs in this pool.Number of Pool VOLs
Smart Tiers information.Smart Pool
• Monitoring Mode: If the continuous mode is enabled, Continuous Mode
appears. If the period mode is enabled, Period Mode appears.
• Tier Management: If Smart Tiers is enabled, Auto or Manual of performance
monitoring and tier relocation appears. If Smart Tiers is disabled, A hyphen
(-) appears.
• Cycle Time: Cycle of performance monitoring and tier relocation.
• Monitoring Period: Time zone of performance monitoring when 24 Hours is
selected in the Cycle Time list.
• If Smart Pool is not enabled, a hyphen (-) appears.
Size of the buffer space in use for new page assignments on each tier.Buffer Space for New page
assignment (%)
• Tier 1: If Smart Tiers is available, the buffer space for new page assignment
to tier 1 appears. Otherwise, a hyphen (-) appears.
• Tier 2: If Smart Tiers is available, and tier 2 exists, the buffer space for new
page assignment to tier 2 appears. Otherwise, a hyphen (-) appears.
• Tier 3: If Smart Tiers is available, and tier 3 exists, the buffer space for new
page assignment to tier 3 appears. Otherwise, a hyphen (-) appears.
Size of the buffer space in use for tier relocation on each tier.Buffer Space for Tier relocation (%)
• Tier 1: If Smart Tiers is available, the buffer space for tier relocation to tier 1
appears. Otherwise, a hyphen (-) appears.
• Tier 2: If Smart Tiers is available, and tier 2 exists, the buffer space for tier
relocation to tier 2 appears. Otherwise, a hyphen (-) appears.
• Tier 3: If Smart Tiers is available, and tier 3 exists, the buffer space for tier
relocation to tier 3 appears. Otherwise, a hyphen (-) appears.
Edit Pools wizard 267