HP P9000 Provisioning for Open Systems User Guide (AV400-96396, October 2011)

Selected LDEVs table
DescriptionItem
The identifiers of the LDEVs to be added to a resource group.LDEV ID
Some undefined LDEV IDs may appear. A hyphen in the LDEV name indicates the LDEV
is undefined.
LDEV names.LDEV Name
Parity group identifier where the LDEV belongs.Parity Group ID
Pool name and identifier where the LDEV belongs.Pool Name (ID)
Capacity of the LDEV.Capacity
Provisioning type of the volume.Provisioning Type
• Basic: Internal volume
• THP: V-VOLs of Thin Provisioning
• External: External volume
• Snapshot: Snapshot volume
Attribute of the volume indicating how the LDEV is being used.Attribute
• Command Device: Command device
• Remote Command Device: Remote command device
• System Disk: System disk
• JNL VOL: Journal volume
• Pool VOL: Pool volume. The number in parentheses is the pool identifier.
• Reserved VOL: Reserved volume
• Quorum Disk: Quorum disk
• -: Volumes other than the above ones
Journal group identifier appears when the attribute is JNL VOL. A hyphen indicates the
attribute is other than JNL VOL.
Journal Group ID
Total number of selected LDEVs.Total
Selected Ports table
DescriptionItem
Port identifiers to be added to a resource group.Port ID
Attribute of the port indicating I/O flow.Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
• Target: Receives I/O commands from a host.
• RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
• External: Issues I/O commands to a target port of an external storage system with
External Storage.
Total number of selected ports.Total
Add Resources wizard 195