HP P9000 Provisioning for Open and Mainframe Systems User Guide

Basic tab
LDEV basic information is displayed in the Basic Properties, LUNs, Hosts, and Concatenated
LDEVs(LUSE) tables.
DescriptionItem
ID: Displays the parity group ID.Parity Group
• Interleaved Parity Groups: Displays the interleaved parity groups.
• RAID Level: Displays the RAID level of parity group. The asterisk (*)
indicates the parity group is the interleaved parity group.
• Drive Type/RPM: Displays the hard disk drive type and RPM.
• Drive Type/RPM: Drive type and rpm in use on this LDEV.
• Encryption: Displays the setting (enable or disable) of encryption.
Name (ID): Displays the pool name and ID.
• RAID Level: Displays the RAID level of pool.
• Type: Displays the hard disk drive type of pool.
Pool
Displays the LDEV capacity of the selected LDEV.Individual Capacity
Displays the type of the LDEV.Provisioning Type
• Basic: Internal volume.
• THP: THP V-VOL.
• External: External volume.
• Snapshot: Snapshot volume.
• External MF: Migration volume.
Displays the LDEV status.Status
• Normal: Normal status.
• Blocked: Blocked status. Host cannot access to the blocked volumes.
• Warning: Problem occurs in the volumes.
• Formatting: The volumes are being formatted.
• Preparing Quick Format: The volumes are in preparation for Quick
Format.
• Quick Formatting: The volumes are being quick formatted.
• Correction Access: Access attribute is being corrected.
• Copying: Data in the volumes are being copied.
• Read Only: The volumes are read only. Data cannot be written on the
Read Only volumes.
• Shredding: The volumes are being shredded.
Displays the attribute of the LDEV.Attribute
• Command Device: Command device.
• Remote Command Device: Remote command device.
• System Disk: System disk.
• JNL VOL: Journal volume.
• Pool VOL: Pool volume. The number in parentheses shows the pool ID.
• Reserved VOL: Reserved volume.
• Quorum Disk: Quorum disk.
• TSE: TSE-VOL.
• Nondisruptive Migration: Volume for the nondisruptive migration.
• Hyphen (-): Volume in which the attribute is not defined.
260 LDEV GUI reference