HP P9000 Provisioning for Open and Mainframe Systems User Guide

Selected LDEVs table
DescriptionItem
LDEV identifier, which is the combination of LDKC, CU, and LDEV.LDEV ID
LDEV name, including the combination of prefix characters and the initial
number.
LDEV Name
Parity group identifier.Parity Group ID
Pool name and pool identifier.Pool Name (ID)
Drive type and rpm in use on this LDEV.Drive Type/RPM
RAID level. An asterisk "*" indicates that the parity group to which the
LDEV belongs is interleaved (concatenated).
RAID Level
Emulation type.Emulation Type
LDEV capacity.Capacity
Format type.Format Type
Storage system identifier in hexadecimal format.SSID
Cache logical partition number, in ID:CLPR format.CLPR
For detailed information about CLPRs, see the HP P9000 Performance for
Open and Mainframe Systems User Guide.
Processor blade identifier. If Auto is selected, the ID is automatically
assigned.
MP Blade ID
Indicates whether the LDEV is being used as the system disk.System Disk
• Yes: System disk.
• No: Not system disk.
Indicates whether Smart Tiers or Smart Tiers Z is enabled or disabled.Multi-Tier Pool
• Enable: The LDEV is for Smart Tiers or Smart Tiers Z .
• Disable: The LDEV is for Smart Tiers or Smart Tiers Z .
242 LDEV GUI reference