HP P9000 Provisioning for Open and Mainframe Systems User Guide

SIM reference codes
The following table provides information about SIM reference codes associated with Thin
Provisioning.
Types of reportsThresholds or ValuesEventSIM Code (XXX
= hexadecimal
pool number)
Information to the
operator
Completion
report to Remote
Web Console
Report to the
host
NoYesYes1% to 100% (in 1%
increments).
Pool usage level
exceeded the
Warning Threshold
620XXX
Default: 70%
NoYesYesDefault: 80%Pool usage level
exceeded the System
Threshold
621XXX
NoYesYes100%Pool is full622XXX
YesNoYesNot applicableError occurred in the
pool
623XXX
YesYesYesNot applicableNo space in the
shared memory
624000
NoYesYesHighest pool thresholdPool usage level
continues to exceed
625000
the highest pool
threshold. SOM 734
must be enabled.
NoYesYes1% to 100% (in 1%
increments).
Pool usage level
exceeded the
Depletion Threshold
626XXX
Default: 80%
YesNoYesNot applicablePool-VOL is blocked627XXX
YesNoNoNot applicableV-VOL management
area cannot be saved
to a pool
640XXX
Automatic completion of a SIM
Some SIMs are completed automatically when you resolve the problem that caused the SIM.SOM
734 must be enabled for automatic completion of a SIM. Automatic completion of a SIM removes
it from the system with no additional manual intervention. After the SIM is automatically completed,
the status of the SIM changes to completed in Remote Web Console in the Confirm window.
The following SIMs occur when the usage level of the pool exceeds the threshold. They are
automatically completed when you resolve the problem causing the SIM.
• SIMs 620XXX, 621XXX, 625000, and 626XXX are automatically completed if you increase
pool capacity by adding pool-VOLs because the condition that caused the SIM removed.
• SIMs are automatically completed in the following cases:
SIM 620XXX
If the THP pool number XXX usage level falls below both of two effective thresholds, SIM
is automatically completed.
◦
◦ SIM 621XXX
In the pool of the pool number XXX, if the THP pool usage level falls below both of two
effective thresholds,SIM is automatically completed.
Working with SIMs 129