HP P9000 Performance for Open and Mainframe Systems User Guide (AV400-96395, October 2011)

Table 6 Operands of the group subcommand and saved monitoring data (continued)
SeeSaved ZIP fileMonitoring data saved in
the file
GUI operationOperand
and Continuous Access
Journal Z (for volumes
Access Journal Z
window
controlled by a particular
CU)
Table 11 (page
93)
LDEV_XXXXX.zip (*2)Statistics about volumes in
parity groups, in external
Select Logical Device
from Object list in
LDEVEachOfCU
volume groups, or in V-VOLPerformance Objects
groups (for volumesfield in Monitor
Performance window. controlled by a particular
CU)
Table 16 (page
96)
PHY_MPPK.zipUsage rates of processor
blades
Select MPPK from
Object list in
PhyMPPK
Performance Objects
field in Monitor
Performance window.
Notes:
(*1) When you specify the PhyPG, PhyLDEV, PhyProc, or PhyESW operand, you can select the storing period of
the monitoring data to be exported from short range or long range. When you specify other operands, the monitoring
data in short range is exported.
(*2) A ZIP file whose name begins with LDEV_.
(*3) A ZIP file whose name begins with RCLDEV_.
(*4) A ZIP file whose name begins with URLDEV_.
You can use the group subcommand more than one time in a command file. For example, you
can write the following script:
group PortWWN CL1-A:CL1-B
group RemoteCopy
If an operand is used more than one time in a command file, the last operand takes effect. In the
example below, the first group subcommand does not take effect, but the second group
subcommand takes effect:
group PortWWN CL1-A:CL1-B
group PortWWN CL2-A:CL2-B
Syntax
group {PhyPG [Short|Long] [parity-group-id]:[parity-group-id]][…]|
PhyLDEV [Short|Long] [parity-group-id]:[parity-group-id]][…]|
PhyExG [[exg-id]:[exg-id]][…]|
PhyExLDEV [exg-id]:[exg-id]][…]|
PhyProc [Short|Long]|
PhyESW [Short|Long]|
PG [[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-group-id]:
[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-group-id]][…]|
LDEV [[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-group-id]:
[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-group-id]][.…]|internal|virtual]|
Port [[port-name]:[port-name]][...]|
PortWWN [port-name]:[port-name]][...]|
LU[[port-name.host-group-id]:[port-name.host-group-id]][…]|
PPCGWWN[[monitor-target-name:monitor-target-name]][…]|
RemoteCopy|
RCLU [[port-name.host-group-id]:[port-name.host-group-id]][…]|
RCLDEV[[LDKC-CU-id]:[LDKC-CU-id]][…]|
UniversalReplicator |
URJNL[[JNL-group-id]:[JNL-group-id]][…]|
URLU [[port-name.host-group-id]:[port-name.host-group-id]][…]|
URLDEVr[[LDKC-CU-id]:[LDKC-CU-id]][…]|
LDEVEachOfCU[[[LDKC-CU-id]:[LDKC-CU-id]][…]|internal|virtual]|
PhyMPPK
}
70 Export Tool