HP P9000 Performance for Open and Mainframe Systems User Guide (AV400-96395, October 2011)

Conventions

The following conventions are used to explain syntax:

DescriptionConvention

Indicates characters that you must type exactly as they are shown.bold

Indicates a type of an operand. You do not need to type characters in italics exactly as they are

shown.

italics

Indicates one or more operands that can be omitted.[ ]

If two or more operands are enclosed by these square brackets and are delimited by vertical bars

(|), you can select one of the operands.

Indicates that you must select one operand from the operands enclosed by the braces. Two or more

operands are enclosed by the braces and are delimited by vertical bars (|).

{ }

Indicates that a previously used operand can be repeated....

Vertical bar delimiter, indicating you can select one of the operands enclosed in square brackets.|

Syntax descriptions

Indicates you can write this script...This syntax...

connect 123.01.22.33connect ip-address

destinationdestination [directory]

destination c:\temp

compresscompress [yes|no]

compress yes

compress no

answer yesanswer {yes|no}

answer no

portsports [name][...]

ports port-1

ports port-1 port-2

Writing a script in the command file

Notes on writing script in the command file

When you write a script in your command file, be aware of the following:

• Ensure that only one subcommand is used in one line.

• Empty lines in any command file will be ignored.

• Use a semicolon (;) if you want to insert a comment in your command file. If you enter a

semicolon in one line, the remaining characters in that line will be regarded as a comment.

Following are examples of comments in a command file:

;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;; COMMAND FILE: command.txt ;;;;

;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

svpip 158.214.135.57 ; IP address of SVP

64 Export Tool