HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 13 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM7x)
Explanation and Recommended ActionsMessage TextMessage ID
Enter one of the listed values.Enter one of the listed values.YKM700E ISPF
Enter the required information at the cursor position.Enter required field at the
cursor position.
YKM701E ISPF
The length of the input data must be crtlen.The length of the data must be
= crtlen.
YKM702E ISPF
crtlen
Necessary data length
Enter hexadecimal characters (0-9, A-F, a-f).Enter hexadecimal characters
(0-9, A-F, a-f).
YKM703E ISPF
Enter alphanumeric characters (0-9, A-Z, a-z).Enter alphanumeric characters
(0-9, A-Z, a-z).
YKM704E ISPF
Each qualifier must be from 1 to 8 alphanumeric characters
(0-9, A-Z, a-z), and must begin with an alphabetic character.
Each qualifier must be 1-8
alphanumeric characters (0-9,
A-Z, a-z), the first alphabetic.
YKM705E ISPF
The length of the input data must be no more than loclen.The length of the data must be
no more than loclen.
YKM706E ISPF
loclen
Input length
Enter the hexadecimal characters (0-9, A-F, a-f) that you want
to search for.
Enter the number (hex.
characters: 0-9, A-F, a-f) to
search for.
YKM707E ISPF
Enter the numeric values (0-9) that you want to search for.Enter the number (numerical
characters: 0-9) to search for.
YKM708E ISPF
Execute the SORT command before executing the LOCATE
command.
Execute the sort command
before executing the locate
command.
YKM709E ISPF
Enter the character you want to search for (P, S, or N/A.Enter one of the following
characters (P, S, N/A) to
search for.
YKM710E ISPF
Enter the required parameters.Required parameter is not
specified.
YKM720E ISPF
Enter the name of the field that specifies the condition.Invalid field name is specified.YKM721E ISPF
Specify correct values for the pattern parameter. Make sure that
none of the following conditions exist:
Invalid pattern is specified.YKM722E ISPF
• A value greater than value 1 was specified for value 2, as
the range specification condition.
• NULL was specified for value 1, as the range specification
condition.
• A value containing an asterisk (*) was specified for value 1
or value 2, as the range specification condition.
• The specified value contained two or more asterisks.
• An asterisk (*) was specified in a location other than before
or after the value.
Enter the valid action name.Invalid action name is
specified.
YKM723E ISPF
The length of the field value must be equal to or less than
value-length.
The length of the data must be
no more than value-length.
YKM724E ISPF
74 Messages