HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)
Table Of Contents
- P9000 for Business Continuity Manager Software Messages
- Contents
- 1 Messages
- 2 Storage System Sense Byte Information
- 3 Support and other resources
- Glossary

Table 64 Details of Error Codes DBxx – E8xx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
Not outputOutputNot outputA Cnt Ac-J Z copy pair status
cannot be changed because the
power-off process is in progress.
DB08
Not
output
OutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the specified volume
is a TCA copy pair.
DB09
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
resynchronized (with the
DB0C
DELTAJNL parameter or ALLJNL
parameter) because the volume is
specified.
Not outputOutputNot outputRegistration to EXCTG has failed
because the expanded SM table
E80B
necessary for the EXCTG
registration has not been
initialized.
Not outputOutputNot outputDeletion from EXCTG has failed
because the specified EXCTG is not
registered.
E826
Not outputOutputNot outputDeletion from EXCTG has failed
because the specified journal
group is not registered.
E82F
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the CLPR number of
E843
the specified volume and the CLPR
number of the journal group do not
match.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
dissolved because the specified
E86B
volume is not a Cnt Ac-J Z copy
pair.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
dissolved because the storage
system is being turned on.
E86D
Not outputOutputNot output.A Cnt Ac-J Z copy pair cannot be
made because a specified volume's
SM is not present
E86E
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because inter-DKC logical
E871
paths (for both directions) have not
been defined. Make sure that
inter-DKC logical paths have
already been established in both
directions.
Not outputOutputNot outputA Cnt Ac-J Z copy pair cannot be
made because the torage system
E876
serial number specified for the
S-VOL is invalid.
Not outputOutputNot outputA Cnt Ac-J Z copy pair could not
be made because there is mix of
E878
volumes with emulation types are
Details of Error Codes 219