HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 55 Details of Error Codes 50xx – 6Axx (continued)
Type of ErrorError DetailsError
Code
OthersPATHCMDCnt Ac-J ZTCACnt Ac-S ZBC Z
• The corresponding volume is
online.
• The corresponding volume is
being used by another program
product such as BC Z, Cnt Ac-S
Z, TCA, Cnt Ac-J Z or
FlashCopy.
• The emulation type of the
corresponding volume is
3390–V.
Not outputOutputNot outputA command device cannot be
redefined because the APID that
64FC
was already defined does not
match the APID you attempted to
define.
Not outputOutputNot outputThe command device cannot be
defined because a command
64FD
device with the same APID has
been defined for another device.
Not outputOutputNot outputA command device cannot be
defined because the APID specified
64FF
by the parameter does not match
the APID defined for the command
device.
OutputNot outputOutputNot outputThe host command parameter is
invalid.
69E4
Not
output
OutputNot outputA path cannot be deleted because
there is an invalid parameter.
69E6
OutputNot outputThe command cannot be executed
because the specified volume is not
installed.
69E7
OutputNot outputThe command cannot be executed
because the specified volume is
blocked.
69E8
Not outputOutputNot outputThe command cannot be executed.
The reason might be one of the
following:
69E9
• The corresponding volume is in
the SIMPLEX status.
• The corresponding volume is not
part of a TCA copy pair.
• The corresponding volume is not
a P-VOL.
Not
output
OutputNot outputA path cannot be established
because there is an invalid
parameter.
69F2
• The storage system serial
number is incorrect.
• The SSID is incorrect.
• The CU number is not
supported.
Details of Error Codes 187