HP P9000 for Business Continuity Manager Software Messages (T5253-96055, September 2011)

Table 42 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ29x) (continued)
Explanation and Recommended ActionsMessage TextMessage ID
cccc (hexadecimal number)
Arbitration command device
number (0000-3FFF)
FFFF is displayed for the
supervisor DKC.
nnnn (hexadecimal number)
Error code
For details about the error codes,
see “Storage System Sense Byte
Information” (page 163).
Processing is terminating because the timeout limit
has expired while waiting for the EXCTG registration
with the YKEWAIT command.
Timeout limit has expired while
waiting for EXCTG registration
process.
YKZ298W MSG SC=4
RC=4
Correct the timeout value or check that the status to
be monitored is correctly specified. Also, check if the
journal group is registered to EXCTG.
The REXX variable is invalid (remains as it was prior
to the YKEWAIT command) if this message is output.
EXCTG information defined in the copy group and
EXCTG information registered in the storage system
do not match.
Definition of xxxxxxxx does not
match the actual configuration.
(JNLG=jj, MIRROR=m, EXCTG=e,
SN=ssssssssssss, CDEV=cccc)
YKZ299E MSG SC=36
RC=36
Correct the copy group definition file. This message
might be output when the EXCTG ID specified in the
copy group definition is being used by another copy
group.
After removing the cause of the problem, execute the
YKMAKE command again with a SELECT(COND)
specification to register the journal group to EXCTG.
This message is output until the corresponding EXCTG
registration process is executed using the YKMAKE
command again.
xxxxxxxx
Items that do not match
CDEV: Arbitration command
device number
JNLG: The storage system serial
number identified by ssssssssssss
and the journal group number
identified by jj is registered to the
EXCTG indicated by e. However,
it was not found in the
configuration file.
JNLG (string)
The journal type registered to the
storage system (the journal type
of the storage system, rather than
of the definition)
R-JNL: Journal of the secondary
site
M-JNL: Journal of the primary site
jj (hexadecimal number)
List of Messages 145