HP P9000 External Storage for Open and Mainframe Systems User Guide (AV400-96392, October 2011)

IBM V7000 series
System parameters for connecting IBM V7000 series
When you connect an IBM V7000 series as an external storage system, set the system parameters
of the IBM V7000 series according to the following table. For the system parameters that are not
in the following table, see the documentation of the IBM V7000 series and set the parameters
appropriately for the connecting configuration.
Table 31 System parameters for connecting IBM V7000 series
Parameter settingParameter
Generichost type
Notes on connecting IBM V7000 series
The model name of the IBM V7000 series is displayed as "SVC" on the Remote Web Console
window.
Notes on connecting IBM XIV series
When connecting an IBM XIV series as an external storage system, note that the type of display
of the system and device serial number differs between IBM XIV series and P9500.
Table 32 Serial number display (IBM XIV series)
Display in IBM XIVDisplay in P9500
TypeItemTypeItem
Decimal valueThe first 2 digits of (System) Serial
number
Decimal valueThe first 2 digits of Serial Number
Decimal valueThe last 5 digits of (System) Serial
number
Hexadecimal valueThe last 5 digits of Serial Number
Decimal valueDevice serial numberHexadecimal valueCharacteristic 1
Fujitsu FibreCAT CX series
System parameters for connecting Fujitsu FibreCAT CX series
When you connect an Fujitsu FibreCAT CX series as an external storage system, set the system
parameters of the Fujitsu FibreCAT CX series according to the following table. For the system
parameters that are not in the following table, see the documentation of the Fujitsu FibreCAT CX
series and set the parameters appropriately for the connecting configuration.
Table 33 System parameters for connecting Fujitsu FibreCAT CX series
Parameter settingParameter
CLARiiON OpenInitiator Type
2Failover Mode
Connecting Fujitsu FibreCAT CX series
Volumes created with the RAID0 level or Individual Disk Units (JBOD disks) of Fujitsu FibreCAT CX
series are not supported.
System parameters for connecting SGI IS4600 series
When you connect an SGI IS4600 series as an external storage system, set the system parameters
of the SGI IS4600 series according to the following table. For system parameters not listed in this
82 Connecting external storage systems