HP P9000 External Storage for Open and Mainframe Systems User Guide (AV400-96392, October 2011)

Discovered External Volumes table
DescriptionItem
Displays the LUN which is connected to the external path with the highest
priority.
LUN ID(Highest Priority)
“?” indicates that a corresponding external volume is not found from the
external path with the highest priority. Confirm the connection with the
external storage system that has failed in the volume discovery, and perform
the operation again.
Name of the storage system that is reported to the host by the external
volume. The displayed items differ depending on the vendor of the storage
system.
Device Name
Capacity of the external volume.Capacity
Identification number of the external volume.Characteristic 1
Identification number of the external volume.Characteristic 2
Indicates the information about the drive of the external volume.Drive Info
SATA is displayed when the external volume is the SATA drive of following
storage systems. Operate SATA drives according to the method of operating
each storage system.
• XP24000/XP20000 Disk Array
• AMS/WMS storage system
• SMS storage system
• Thunder 9500V storage system
104 External Storage GUI reference