HP P9000 Continuous Access Synchronous User Guide (AV400-96400, October 2011)

This dialog box lets you change the P-VOL Fence Level for an existing pair. See “Change fence
level” (page 54) for complete information.
DescriptionItem
Shows the selected volume’s port, GID, LUN (LDKC number, CU number, LDEV number).Volume
Where the option is defined for rejecting write operations to the P-VOL.P-VOL Fence Level
Display Filter dialog box
This dialog box lets you filter the information displayed on the Pair Operation window.
Filters are determined by the tree selection.
• When Subsystem or LDKC is selected, all settings are available.
• When a CU grouping or a CU is selected, GID and Port are disabled with All displayed. They
cannot be changed.
• When a CU is selected, the CU setting is not available.
• When a port is selected, the port setting is not available.
• When GID is selected, the group and port settings are not available.
DescriptionItem
Select the port.Port
Select the GID (host group identification number).GID
Select the CU.CU
Select the pair type: synchronous, synchronous-C, ESAM, or all types.Type
96 Continuous Access Synchronous GUI reference