HP P9000 Continuous Access Synchronous for Mainframe Systems User Guide (AV400-96398, October 2011)

Table 41 GDPS Continuous Access Synchronous Z Compatible XRC matrix (continued)
XP24000/XP20000 Disk
Array,
XP12000 Disk
Array/XP10000 Disk Array
P9500IBM 3990 6EFeature
Communication using switch
and extender using Fibre
Communication using switch
and extender using Fibre
ESCON – max of 43 km
communication using
channel extenders
Interface between storage
systems
Channel and Fibre Channel
cable
Channel and Fibre Channel
cable
Synchronous, asynchronousSynchronousSynchronousCopy modes supported
The default for IBM software
commands is synchronous.
Not Supported. Dual Copy
is not supported by storage
system.
Not Supported. Dual Copy
is not supported by storage
system.
SupportedDual Copy combination
support
Supported. Some additional
options only available using
Remote Web Console/SVP.
Supported. Some additional
options only available using
Remote Web Console/SVP.
SupportedTSO command Support
Supported. Some additional
options only available using
Remote Web Console/SVP.
Supported. Some additional
options only available using
Remote Web Console/SVP.
SupportedICKDSF command support
SupportedSupportedSupportedP/DAS support
XP12000 Disk
Array/XP10000 Disk Array
32,76864Maximum pairs
16,384
XP24000/XP20000 Disk
Array
32,768
8 per logical control unit8 per logical control unit4Maximum paths between
storage systems
1 to 4, default is 4 per LCU.
Requires Remote Web
1 to 4, default is 4 per LCU.
Requires Remote Web
4Number of copy operations
on initial copy
Console (or SVP) to change
default.
Console (or SVP) to change
default.
Requires main storage
system port to be set to
Requires main storage
system port to be set to
NoDedicated interface between
storage systems
target by Remote Webtarget by Remote Web
Console (or SVP) orConsole (or SVP) or
automatically in response toautomatically in response to
establish and delete path
commands.
establish and delete path
commands.
3 or 15, default = 15 tracks3 or 15, default = 15 tracks1-255, default is 15 (setting
of 1 copies a maximum of 3
PACE parameter initial copy
option
tracks at a time, 2-255
copies a maximum of 15
tracks at a time)
R-VOL Data Never – Default
R-VOL Status
R-VOL Data Never – Default
R-VOL Status
Yes No – DefaultCRITICAL pair error options
(Fence Level parameter)
FREEZE/RUN by logical
controller SSID pair
FREEZE/RUN by logical
controller SSID pair
FREEZE/RUN by logical
controller SSID pair
CGROUP
SupportedSupportedSupportedCQUERY
98 Using PPRC commands for Continuous Access Synchronous Z