HP P9000 Continuous Access Synchronous for Mainframe Systems User Guide (AV400-96398, October 2011)

Table 64 Continuous Access Synchronous Z scripting error codes (continued)
Error descriptionError messageInternal codeMessage ID
A functional macro parameter combination error is
found. ($Sync and $TimeStamp.)
Illegal combination ($Sync
and $TimeStamp).
52052995
$CTG is not described when asynchronous copy pair
creation.
$CTG not found.53012996
The specified device is not mounted.non-device error.4001-
The specified command cannot be performed under
this pair status.
Pair status error.4002-
The specified command cannot be performed with this
volume type.
Volume type error.4003-
The description is not found in the device list of macro.Device list empty.4004-
An error occurred during the acquisition of the volume
mounting status.
API error(GetEquipInfoEx).5001-
An error occurred during the getting pair status
operation.
API
error(GetPairStatus256).
5002-
ErrorCode=6005 xxxx *
An error occurred during the getting pair status
operation.
API error(GetPairStatus).
ErrorCode=6005 xxxx *
5003-
An error occurred during the create pair operation.API error(SetCreatePair).5004-
ErrorCode=6005 xxxx *
An error occurred during the suspending pair operation.API error (SuspendPair).5005-
ErrorCode=6005 xxxx *
An error occurred during the changing pair options
operation.
API error
(ChangePairOption).
5006-
ErrorCode=6005 xxxx *
An error occurred during the release pair operation.API error (DeletePair).5007-
ErrorCode=6005 xxxx *
An error occurred at the copy start instruction.API error
(StartCreatePair).
5008-
ErrorCode=6005 xxxx *
An error occurred at retrying the getting pair status
operation.
API retry
(GetPairStatus256).
5020-
The number of pairs that is specified in the device list
exceeds the maximum value.
Too many pairs
(SetList/AddList).
4006-
The operation is interrupted by a user.Abort by operator.6666-
The operation is interrupted according to the modify
mode timeout.
Abort by unlock.6667-
* ErrorCode = 6005 xxxx corresponds to error codes of Remote Web Console. For details about Remote Web Console
error codes, see the HP P9000 Remote Web Console Messages.
128 Continuous Access Synchronous Z scripting