HP P9000 Business Continuity Manager User Guide

Data Format
The format for the SYSIN dataset is as follows:
• Dataset format: Sequential dataset in the fixed-length record format
• Record length: 80 bytes
• Block size: Optional (multiple of 80)
An input control statement is not required.
Table 103 (page 566) shows the output formats of the Business Continuity Manager log data output
tool.
Table 103 Output format of Business Continuity Manager Log Data Output Tool
DescriptionOutput ContentsLengthOffset
Output data length = 32 + log data length (n)Output data length2+X'00'
'0000'XReserved2+X'02'
For the first record: '01' XDivision flag 11+X'04'
For records other than the first record: '00'
X
For the last record: '01' XDivision flag 21+X'05'
For records other than the last record: '00' X
Time stamp specified by the system logger
service upon log data output.
GMT time stamp (TOD format)8+X'06'
Time stamp specified by the system logger
service upon log data output.
LOCAL time stamp (TOD format)8+X'0E'
'00...00' XReserved10+X'16'
–Log datan+X'20'
ISPF Log Data
To check the actions performed in the ISPF panel of Business Continuity Manager:
1. From the ISPF menu, choose 7 Dialog Test. The Primary Option panel displays.
2. From the Primary Option panel, choose 5 Log.
The ISPF log data is displayed. The displayed ISPF log data can be printed.
NOTE:
• After command operations from the ISPF panel continue for a long period, the ISPF log dataset
might become full, and might terminate abnormally. To prevent this, when you start the ISPF
panel, delete ISPF log information and empty the ISPF log dataset.
• When operating the ISPF panel for a long period, to prevent the log dataset from becoming
full, regularly switch to another dataset by entering the LOG command in the Command line
by choosing 3.
If processing terminated abnormally, choose 4 in the menu to terminate the ISPF panel, save
the current log dataset, and then allocate another log dataset.
CLI Command-Execution Logs
CLI command-execution logs for Business Continuity Manager are output to SYSLOG. The log data
for internal CLI commands executed when operating the ISPF panel are also output.
566 Troubleshooting