HP P9000 Business Continuity Manager User Guide

MSGLEVEL=SYSTSPRT-message-level,console-message-level<GROUP string up to 38
characters>
Used to change the MSGLEVEL value specified in the YKMONOPT file. Specifiable values are CONS,
ERROR, STATUS, and INFO.
For details on the MSGLEVEL value, see the HP P9000 for Business Continuity Manager Reference
Guide for the description on parameters in the YKMONOPT file.
Example
To change the CYCLETIME value to 600 for the Business Continuity Manager Monitor instance
whose cataloged procedure for startup name is YKBCMMON, enter the following command:
F YKBCMMON,SET CYCLETIME=600
To change the WAITTIMEOUT value to 360 for the Business Continuity Manager Monitor instance
whose cataloged procedure for startup name is YKBCMMON, enter the following command:
F YKBCMMON,SET WAITTIMEOUT=360
To change the monitoring status of the copy group (copy group ID: BCMTC) in the Business Continuity
Manager Monitor instance whose cataloged procedure for startup name is YKBCMMON, enter the
following command:
F YKBCMMON,SET MONITOR=START,CGID=BCMTC
To change the level of output messages as follows in the Business Continuity Manager Monitor
instance whose cataloged procedure for startup name is YKBCMMON, enter the command shown
below:
• SYSTSPRT message level: INFO
• Console message level: CONS
F YKBCMMON,SET MSGLEVEL=INFO,CONS
SLEEP command
To put Business Continuity Manager Monitor to sleep, use the MODIFY SLEEP command.
Format
If both the name of the cataloged procedure for startup and the identification name were specified
in the START command:
MODIFY
Δ1cataloged-procedure-for-startup-name.]identification-name
,SLEEPΔ1label-name[,sleep-duration]
If only the name of the cataloged procedure for startup was specified in the START command.
MODIFY
Δ1cataloged-procedure-for-startup-name
,SLEEPΔ1label-name[,sleep-duration]
Operands
cataloged-procedure-for-startup-name
Used to specify the name of the cataloged procedure for startup that was specified in the START
command when Business Continuity Manager Monitor was started.
identification-name
Used to specify the identification name that was specified in the START command when Business
Continuity Manager Monitor was started.
SLEEP
Operator commands available in BCM Monitor 525