HP P9000 Business Continuity Manager User Guide

4. Press the Enter key.
The Copy Group Detail Definition panel appears (in the initial status, no display line appears).
5. Press the F4=Attr key.
The Copy Group Attributes For Container (CAJ) panel appears.
6. Specify copy group attributes (such as PROT MODE).
7. Press Enter.
The Copy Group Detail Definition panel appears.
Adding a C/T group
To add a C/T group:
1. In the Copy Group Detail Definition panel, press the F5=Add key.
The Setting C/T ID Attributes panel appears.
2. Specify C/T ID (JNLG) (consistency group ID for the journal group) and sub C/T ID (JNLG).
3. Press the Enter key.
The Copy Group Pair Detail panel appears. Initially, no copy pairs appear because no copy
pairs have been defined at that point.
4. Add a copy pair to the copy group.
The operations for adding a copy pair to a copy group are the same as those in “Adding the
copy pair to the copy group (Cnt Ac-J Z)” (page 480).
5. If there are more copy pairs to add to the consistency group, press the F5=Add key and repeat
step 4.
Defining a copy group container 487